Aluminium 5083 Alloy
Aluminium 5083 Alloy
Aluminium 5083 Alloy
This is an aluminium alloy with magnesium and a very small amount of manganese and chromium. It has a high resistance to corrosion by seawater and chemicals.
Alloy 5083 retains excellent strength after welding. It has the highest strength of the non-heat treatable alloys it has an Ultimate Tensile Strength of 317 MPa or 46000 psi and a Tensile Yield Strength of 228 MPa or 33000 psi. It is not the chosen alloy for use in temperatures in excess of 65 °C
Alloy also is known as
Alloy 5083 can also be referred to as the following grades and specifications but they may not always be a direct equivalent.
GM41
A95083
AlMG4.5Mn
Fabrication
Work-ability – Cold: Average
Maintainability: Poor
Temper Types
The most common tempers for 5083 aluminium are:
- O - Soft
- H111
- H32
We are aluminium stockholders and cover the whole of the United Kingdom, Call us today to discuss your requirements
Weldability
Weldability
When welding 5083 to itself or another alloy from the same group, the recommended filler metal is 5183. Other suitable fillers are 5356 and 5556.
Weldability – Gas: Average
Weldability – Arc: Excellent
Weldability – Resistance: Excellent
Brazability: Poor
Solderability: Poor
Chemical Composition
5083 Alloy
| Chemical Element | % Present |
| Manganese (Mn) | 0.40 - 1.00 |
| Iron (Fe) | 0.40 max |
| Copper (Cu) | 0.10 max |
| Magnesium (Mg) | 4.00 - 4.90 |
| Silicon (Si) | 0.0 - 0.40 |
| Zinc (Zn) | 0.0 - 0.10 |
| Chromium (Cr) | 0.05 - 0.25 |
| Titanium (Ti) | 0.05 - 0.25 |
| Other (Each) | 0.0 - 0.05 |
| Others (Total) | 0.0 - 0.15 |
| Aluminium (Al) | Balance |
Properties
Properties
| Physical Property | Value |
| Density | 265 g/cm³ |
| Melting Point | 570 °C |
| Thermal Expansion | 25 x10^-6 /K |
| Modulus of Elasticity | 72 GPa |
| Thermal Conductivity | 121 W/m.K |
| Electrical Resistivity | 0.058 x10^-6 Ω .m |
Plate - 6.3mm to 80mm
| Mechanical Property | Value |
| Proof Stress | 115 Min MPa |
| Tensile Strength | 270 - 345 MPa |
| Hardness Brinell | 75 HB |
Plate - 80mm to 120mm
| Mechanical Property | Value |
| Proof Stress | 110 Min MPa |
| Tensile Strength | 260 Min MPa |
| Hardness Brinell | 70 HB |
| Elongation A | 12 Min % |
